Mitsubishi Electric Melservo MR-J3- 350B4, Инструкция по эксплуатации

Страница: 303 / 408

13 - 6
13. SERVO AMPLIFIERS WITH A LARGE CAPACITY (30k TO 55kW)
(2) Drive unit
(a) 200V class
Model
Item
MR-J3-DU30KB MR-J3-DU37KB
Voltage/frequency 1-phase 200 to 230VAC, 50/60Hz
Permissible voltage
fluctuation
1-phase 170 to 253VAC
Permissible frequency
fluctuation
Within 5%
Control power
supply
Power consumption 45W
Main circuit power supply The main circuit power of the drive unit is supplied by the converter unit.
Voltage/frequency 24VDC 10% Interface power
supply
Power supply capacity (Note) 150mA
Control system Sine-wave PWM control, current control system
Dynamic brake External option
Protective function
Overcurrent shut-off, overload shutoff (electronic thermal protector)
Servo motor overheat protection, encoder error protection, undervoltage
Instantaneous power failure protection, overspeed protection
Excessive error protection
Structure Force-cooling, open (IP00)
[ ] 0 to 55 (non-freezing) During
operation
[ ] 32 to 131 (non-freezing)
[ ] 20 to 65 (non-freezing)
Ambient
temperature
In storage
[ ] 4 to 149 (non-freezing)
In operation Ambient
humidity
In storage
90%RH or less (non-condensing)
Ambient
Indoors (no direct sunlight)
Free from corrosive gas, flammable gas, oil mist, dust and dirt
Altitude Max. 1000m above sea level
5.9 [m/s
2
] or less
E
nv
ironm
en
t
Vibration
19.4 [ft/s
2
] or less
[kg] 26
Mass
[lb] 57.32
Note. 150mA is the value applicable when all I/O signals are used. The current capacity can be decreased by reducing the number of
I/O points.