MA lighting grandMA Скачать руководство пользователя страница 5

Страница: 5 / 232

Hotline: +49 5251 688865-99

. Operating Manual grandMA Version 5.4

55555

1 . 5

1 . 5 Safety Requirements (Important, read carefully!)

Safety Requirements (Important, read carefully!)

1 . 5 . 1

1 . 5 . 1Touchscreen

Touchscreen

Never use any sharp items when operating the touchscreens! Deep scratches will

damage the screen. During operation, due to temperature fluctuations, the calibration

of the touchscreens may change, so an adjustment may be necessary.

2.12

Settings in the Setup Menu (point 1)

1 . 5 . 2

1 . 5 . 2 Sockets for keyboard and mouse

Sockets for keyboard and mouse

These sockets are located on the rear of the unit and are very delicate; especially

during transport, take care that these parts are not exposed to mechanic stress.

1 . 5 . 3

1 . 5 . 3 Transportation/Case

Transportation/Case

During transport, take care that the touchscreens are not exposed to mechanical
stress. Flightcases not provided by MA Lighting have to be designed in a way that

under no circumstances

pressure can be exerted on the TFT displays.

1 . 5 . 4

1 . 5 . 4 P

Panel

anel

(grandMA only)

If the mechanical parts of the display panel have not been moved for a period of time

(more than 24 hours typically), you may feel a stronger resistance when adjusting the

angle. This is normal and related to the mechanics of the pannel.

1 . 5 . 5

1 . 5 . 5 Battery

Battery

Battery (not on the ultra-light and Micro)

In case of power failure, the console offers (with fully charged battery) an emergency

backup of at least 12 minutes. In case of a power failure, the console will automatically

switch off after approximately another 3 minutes or another 12 minutes when

CONTINUE is pressed. If

this occurs

, the console will

automatically save all

data

When switching off the unit via

built-in power switch

, all current show data is

saved automatically.
In case of an automatic shut-down after a power failure (described above), the unit

must be running for

at least

10 minutes, in order to guarantee a proper SAVE

procedure the next time the unit is switched off.

By ignoring this advice the

harddisk may be be damaged.

The battery needs approximately 4–8 hours for a full recharge. Only then the battery

is able again to bridge another power failure of up to 12 minutes.

According to manufacturer provisions, the battery has to be changed

after 5

years at latest

. Please attach a label on the unit, indicating the date of purchase,

preferably update data etc. (choose a location, where this information can easily be
seen). (This manual was printed in the year 2004.)

1 . 5 . 6

1 . 5 . 6 Harddisk*

Harddisk*

During operation, do not push or knock the unit.
The built-in notebook harddisk is secured by a rubber-upholstery, however, mechanical

stress can still damage the unit and lead to e.g. a complete loss of data.
Please read the appropriate notes and warnings given under „Autosave“ and „Oops

Settings“, if the unit is to be used in very loud environment! Not necessary for the

MICRO, as a Compact Flash is used.

1 . 5 . 7

1 . 5 . 7 Housing

Housing

– Do not block or cover the ventilation. If there is a high ambient temperature, the

display pannel (grandMA only) should be at least 5 cm open to ensure sufficient

ventilation.

– Do not place any drinks on the unit.

– Do not use excessive force when adjusting the viewing angle of the display panel

(grandMA only).