MA Lighting Technology GmbH . Dachdeckerstr. 16 . D-97297 Waldbüttelbrunn . www.malighting.de eMail: [email protected]
90
90
90
90
90
4 . 2 . 5
4 . 2 . 5
4 . 2 . 5
4 . 2 . 5
4 . 2 . 5Playing back sequences or chasers
Playing back sequences or chasers
Playing back sequences or chasers
Playing back sequences or chasers
Playing back sequences or chasers
Using the EXECUTOR button, you can playback the stored Sequences directly.
If the green LED on the button is lit, a Cue or a Sequence of cues is stored on this button.
If the yellow LED is lit or is flashing, this Cue, Sequence of cues or Chaser (a sequence which as been told to run
automatically) is activated.
The yellow LED indicates the beat of a Chaser.
Push up the respective Master Fader for the EXECUTOR faders to see the dimmer values. Playback Cues using the
Go+ button (standard setting is button below the Fader). If the green LED in the button above the Fader is on, a
Cue or a Sequence is stored on this button.
If the yellow LED is on or is flashing, this Cue, the Sequence or the stored Chaser is activated. The yellow LED
indicates the beat of a Chaser.
Using the PAGE keys, you can select other pages.
5.5
5.5
5.5
5.5
5.5
PAGE Administration (PAGE)
With the Fader to the right of the EXECUTOR buttons, you can either set fixed fade times or perform manual fade-
in when playing back Cues using the EXECUTOR buttons.
Press the key above the Fader once (red LED is on). Set the desired fade time using the Fader. When selecting the
Sequence using the EXECUTOR buttons, only the fade time set here will be used (this also applies to SNAPDELAY
times).
Press the key above the Fader again (green LED is on). Select the sequence using the EXECUTOR button. Using
the Fader, you can now fade in the selected sequence. Default setting for the Fader can be changed to fade just
upwards or in both directions
2.13
2.13
2.13
2.13
2.13
Settings in the DEFAULTS menu below the Executor Defaults Crossfade.
With the PREVIEW function, Cues can be displayed in the FIXTURE SHEET or CHANNEL SHEET without being
output to stage. Press the PREVIEW key once and playback the desired Cue using the EXECUTOR button.
4.2.6 Saving a sequence
4.2.6 Saving a sequence
4.2.6 Saving a sequence
4.2.6 Saving a sequence
4.2.6 Saving a sequence
To protect a sequence or Cues of a sequence against unintended modifications, you can lock them; Playback is
possible, the Edit mode cannot be activated, however.
On the CommandLine, enter:
lock_seq_(number or area of the sequences)
lock_seq_(number of the sequence)_cue_(number or area of the Cue)
In the sequence pool, the locked sequences are identifiable by their yellow key symbol, in the Assign menu, all
values are displayed in red. If only some part (individual Cues) of the sequence are saved, this will not be
displayed in the sequence pool.
If you want to re-edit the sequence:
On the CommandLine, enter:
unlock_seq_(number of the sequence)
unlock_seq_(number of the sequence)_cue_(number or area of the Cue)
or
Insert the functions LOCK / UNLOCK as Quikeys
Press LOCK or UNLOCK and choose the sequence in the sequence pool
Start this cue with the GO button.
Cues within the Mastersequence can be directly loaded**
Cues within the Mastersequence can be directly loaded**
Cues within the Mastersequence can be directly loaded**
Cues within the Mastersequence can be directly loaded**
Cues within the Mastersequence can be directly loaded**
Press
GOTO key twice (LED is on).
Enter Cue number using the keypad and confirm with
ENTER.
The Cue will be loaded and displayed as next (red blinking background) in the small executor window.
Start this cue with the
GO button.
