MA Lighting Technology GmbH . Dachdeckerstr. 16 . D-97297 Waldbüttelbrunn . www.malighting.de eMail: [email protected]
82
82
82
82
82
SETUP mode:
In this mode, you can position fixtures using mouse, Encoders or touch screen. Changes will automatically be
saved to the SETUP menu.
The SETUP menu may not be opened.
Open STAGE and choose SETUP mode.
Select fixtures (usingthe mouse or the touch screen).
adjust the 3 axes using the Encoder die 3 Achsen verstellen,
or
modify the X and Y axes usingthe left mouse button; if you hold the left and right mouse button, only the Z axis
will be modified.
- X, Y, and Z axes can be modified individually or groupwise (see also 2.2.3)
- after switching from POSITION to ROTATION, you can rotated fixtures individually or groupwise on the X, Y, or Z
axis
NOTE: Perform changes preferably using the Encoders, as with the mouse, you run the risk of changing the stage
setting just like that. Undo unwanted changes using OOPS (except with MICRO).
WIZZARD in the SETUP mode:
Here, you can arrange fixtures in geometrical figures (e.g. square, circle, arc). You can, however, position each and
every fixture manually (see above), but this function saves you a lot of precious time. A special highlight is the
Calibration mode that you can use to transfer the actual fixture position to the console.
The SETUP menu may not be opened.
Open STAGE and choose SETUP mode.
Select fixtures (using the mouse or the touch screen) or enter the ID number area.
In the WIZZARD, choose the desired function.
-
ARRANGE IN MATRIX:
Select those fixtures to be embedded into the matrix (the number should be the sum from horizontal and
vertical lines as otherwise no complete square will result)
Enter the number of horizontal ROWS and vertical COLUMNS;
Enter the horizontal and vertical distances of the fixtures; the resulting total value may, however, may not
exceed the stage size.
Confirm using the OK button
