MA Lighting Technology GmbH . Dachdeckerstr. 16 . D-97297 Waldbüttelbrunn . www.malighting.de eMail: [email protected]
80
80
80
80
80
Setting Filters, to just copy/move individual Functions
Setting Filters, to just copy/move individual Functions
Setting Filters, to just copy/move individual Functions
Setting Filters, to just copy/move individual Functions
Setting Filters, to just copy/move individual Functions
-
Example: You have set different positions for 10 Scanners. Now, you want to just copy/move the “PAN“ value
from one fixture to the others.
Pressing the “Filter“ button will open “AT Filter Option“ menu. In this menu, you’ll find all functions available.
The functions are all displayed with a green background. Pressing on a function will deactivate it (will be displayed
in black then).
If you just want to copy/move the “PAN“ value, deactivate “TILT“ and leave the menu by pressing the “X“ key.
Now, only the “PAN“ value will be changed, when you copy/move.
3.1
3.1
3.1
3.1
3.10
0
0
0
0 Blind Modus
Blind Modus
Blind Modus
Blind Modus
Blind Modus
The Blind mode will separate the stage output from the programmer, i.e. when changing values being in the Blind
mode, the values of the stage output will remain as they are. You can program shows without changing the
current stage lighting; by simply switching over using the BLIND key you gain a quick access to the stage lights.
Hold the BLIND key, until you hear the beep and the key LED starts to blink.
The title bar of all Sheets affected by the Blind mode will change from blue to red.
The Blind mode differs as follows from the stage output:
- all other Sheets are available.
- changes in presets can be saved in Blind mode and when switching to stage output, the old value will still be visible.
- changes in SETUP will also be visible in the stage output.
- sequences, effects, groups, etc. that you delete while in Blind mode, will also be deleted in the stage output.
- PDA will show the respective mode without indication whether it is the Blind mode or the stage output.
To switch off the Blind mode:
Hold the BLIND key, until you hear the beep and the key LED goes out.
After switching over, all changes made in Blind mode will immediately be active in the stage output.
