MA lighting grandMA Скачать руководство пользователя страница 186

Страница: 186 / 232

MA Lighting Technology GmbH . Dachdeckerstr. 16 . D-97297 Waldbüttelbrunn . www.malighting.de eMail: [email protected]

186

13 Utility Menu

Utility Menu

You will need this menu, if the main program or the actual show is damaged due

to a crash or some other error. For the grandMA light and ultra-light you MUST

have an external keyboard.

In the Utility Menu, you can load or delete an old grandMA operating system.

You can also delete shows here. You can delete the current show (this show is

automatically loaded upon power-up of the console). You can renew the Firm-

ware for the second built-in Computer (Motorola) and you can also renew the

grandMA operating system via floppy disk.

During the Boot-up process you will see all loaded program segments (blue

background) on the right TFT display. In order to access the Utility Menu you

have to push any key as soon as the message :

??? TO ENTER UTILITY MENU PRESS ANY KEY ???

is displayed with

red background during the boot-up process. The menu will open after approx.

10-20 seconds.

Press 1: Restore

grandMA

operating system

If you press the „1“ key on the keyboard, you will see a list with all systems existing

on the harddisk. By pressing one of the displayed keys (a, b, c...) the respective

system will be installed. You have to confirm installation by pressing “o“.

VERY

IMPORTANT - this is the letter “o“, not the number “0“

.As soon as

the installation is completed, the display will show UPDATE DONE next to STATUS.

You can start the console by pressing the “ESC“ key twice.

Press 2: Delete

grandMA

operating system

Upon every update, a safety copy of the system will be automatically created on

harddisk. In order to delete an older system from harddisk, press „2“ on the keyboard.

You will see a list with all systems existing on the harddisk. By pressing one of the

displayed keys (a, b, c...) the respective system will be deleted. You have to confirm

the delete process by pressing “o“.

VERY IMPORT

VERY IMPORTANT - this is the letter

ANT - this is the letter

“o“ not the number “0“

“o“ not the number “0“.....

After deletion is completed, the display will show

DELETE DONE next to STATUS. You can start the console by pressing the “ESC“ key

two times.

Press 3:Delete (old)

grandMA

shows,

Upon every update, a new folder for the shows will automatically be created

to cleanup the harddrive on the harddisk. During every update, the console will save

all old shows, converted to suite the new system software, in the youngest folder.

From the time of the update, all new created shows will be automatically saved in

this folder, too.

In order to delete shows from an older system version from the harddisk, press „3“

on the keyboard. You will see a list with all shows in all system versions existing on this

harddisk. By pressing one of the displayed keys (a, b, c...) the respective shows will be

deleted. You have to confirm the delete process by pressing “o“.

VERY IMPORT

VERY IMPORTANT -

ANT -

this is the letter “o“ not the number “0“

this is the letter “o“ not the number “0“.....

After deletion is completed, the

display will show DELETE DONE next to STATUS. You can start the console by pressing the

“ESC“ key twice.

Press 4: Delete current show

If you press „4“ on the keyboard, the current show (this show will be automatically loaded

upon power-up of the console) will be deleted. You have to confirm the delete process by

pressing “o“.

VERY IMPORT

VERY IMPORTANT - this is the letter “o“ not the number

ANT - this is the letter “o“ not the number

“0“

“0“.

After the deletion is completed, the display will show DELETE DONE next to STATUS.

You can start the console by pressing the “ESC“ key twice.

Press 5: Update firmware with display

If you press „5“ on the keyboard, you can renew the Firmware for the second built-in

Computer (Motorola). In order to update the software: insert the current update disk

labeled „LAST DISK“. You have to confirm the update process by pressing “o“.

VERY

IMPORT

IMPORTANT - this is the letter “o“ not the number “0“

ANT - this is the letter “o“ not the number “0“

ANT - this is the letter “o“ not the number “0“.

As soon as the

update is completed, the display will show UPDATE DONE next to STATUS. You can start

the console by pressing the “ESC“ key twice.

Press 6: Update

grandMA

In order to update the software: insert the current update disk labeled „LAST DISK“. You

have to confirm the update process by pressing “o“. Shortly after, you will be asked for

“DISK 1“. Now insert this disk and confirm by pressing “o“

.VERY IMPORT

.VERY IMPORTANT - this

ANT - this

is the letter “o“ not the number “0“

is the letter “o“ not the number “0“.

The disk will be read (might take a little

while). Following that, you will be asked for „DISK 2“. Insert disk 2 and confirm again with

“o“.

VERY IMPORT

VERY IMPORTANT - this is the letter “o“ not the number “0“

ANT - this is the letter “o“ not the number “0“

(this

will take a little longer now). As soon as the update process is completed, the display

shows UPDATE DONE, PLEASE REBOOT next to STATUS. Now please reboot the console by

using the combination CTRL-ALT-DEL or the RESET key on the rear of the console.

IMPORTANT: Avoid downdating the console to version 4.3.6X and then, or later,

updating to version 5.xxx. This operation would destroy the operating system. If

so, please contact the hotline.

Содержание grandMA









































































































































































































































Результаты поиска

Содержание grandMA

Отзывы:

Похожие инструкции для grandMA

Бренды по названию

Популярные бренды

MA lighting grandMA, Руководство по эксплуатации

Результаты поиска

Содержание grandMA

Отзывы:

Похожие инструкции для grandMA

Бренды по названию

Популярные бренды