MA Lighting Technology GmbH . Dachdeckerstr. 16 . D-97297 Waldbüttelbrunn . www.malighting.de eMail: [email protected]
120
120
120
120
120
-
To: The end point for the automatic modification in terms of percentage.
-
Phase: Here, an angle for moving individual modulators can be set.
-
Rate: Display of the set ratio between the speed for this individual Modulator as to that of the whole Effect
Group (Assignment item
Rate
Rate
Rate
Rate
Rate
, below).
-
Base: You can also set an average value for each Effect using the BASE VALUE option. The set value will
overwrite all previously modified values of this function and by this, will control all Fixtures/Dimmers evenly.
The value can be set to between 0 and 100%.
Before modifying the BASE VALUE, select the Effect first. Press the BASE VALUE key once (green background).
Now, you can set an average value using the Encoder below. Clicking the Encoder once will automatically set
the value to 50% (default value). Pressing the Encoder a second time, the value will be deleted and set to NONE
(no BASE VALUE). If
no
no
no
no
no
BASE VALUE ist set, the Cue that is playing back or a direct access value will take effect.
You can also use the ALIGN function to set this value.
3.4.1
3.4.1
3.4.1
3.4.1
3.4.1
ALIGN function
-
Offset: By modifying the Offset, the starting points for the selected Fixtures and Dimmers will change. Default
setting is between 0 and 100, i.e. the first Fixture/Dimmer starts with an offset of 0, the last with a maximum
offset of 100%; all Fixtures/Dimmers in between will be distributed evenly. The maximum limit for Offset
modifications that can be set is from -100 to +100.
Before modifying the value of a size, select the Effect first. Press the OFFSET key once (green background). Now,
you can set a different Offset using the Encoder below. Clicking the Encoder once will automatically set the
value to 0. You can also use the ALIGN function to set this value.
3.4.1
3.4.1
3.4.1
3.4.1
3.4.1
ALIGN function
-
Rate: Display of the set ratio between the speed for this individual Effect as to that of the whole Effect Group.
Possible settings range between 1:16 and 4:1. At a ratio of 1:16, the rate set for the Effect Group will be divided
by 16. If the setting is 4:1, the rate will be multiplied by four.
Before modifying the ratio’s value, select the Effect first. Press the RATE FACTOR key once (green background).
Now, you can set a different ratio using the Encoder below. Clicking the Encoder once will automatically set the
value to 1:1.
-
Grp (Group): Display of the set number, by which the assigned Fixtures or Dimmers will be divided. In the
subdivided groups, the Effect will then fully be executed.
Before modifying the subdivision value, select the Effect first. Press the GROUPS key once (green background).
Now, the subdivision of the Effect can be set using the Encoder below. Clicking the Encoder once will automati
cally delete the set value.
-
Wing: The set number will indicate, how often the assigned Fixtures or Dimmers and the Effect will be
mirrored. Possible settings range between –8 and +8.
Example: With a setting of 2, the assigned Fixtures/Dimmers will be divided in the middle. The set effect will
now be executed in the first half forwards up to the middle, and in the second half, the Effect will be executed
in reverse from the middle onto the last Fixture/Dimmer.
With a setting of -2, the assigned Fixtures/Dimmers will be divided in the middle. The set effect will now be
executed in the first half forwards up to the middle, and in the second half, the Effect will be executed in
reverse and phase-shifted by 180° from the middle onto the last Fixture/Dimmer.
Before modifying the wing value, select the Effect first. Press the WINGS key once (green background). Now, the
