MA Lighting Technology GmbH . Dachdeckerstr. 16 . D-97297 Waldbüttelbrunn . www.malighting.de eMail: [email protected]
16
16
16
16
16
– The set fader values are shown in the dimmer display.
Channels can also be selected and modified by the mouse, wheel, encoder and the keypad.
With the LINK function (right on top of channel and fader sheets), the window will automatically scroll to show the
channels set for the faders.
Controlling Fixture attributes:
Controlling Fixture attributes:
Controlling Fixture attributes:
Controlling Fixture attributes:
Controlling Fixture attributes:
GROUP window
GROUP window
GROUP window
GROUP window
GROUP window
Select a fixture by its key (or click on the name of a fixture in the fixture sheet).
GOBO, COLOUR ... window
GOBO, COLOUR ... window
GOBO, COLOUR ... window
GOBO, COLOUR ... window
GOBO, COLOUR ... window
Open a preset for the selected unit (if no presets are displayed, run the selected function via an encoder).
Pressing and turning the encoder allows for fine tuning
.
1.1
1.1
1.1
1.1
1.10.4
0.4
0.4
0.4
0.4 Storing Settings
Storing Settings
Storing Settings
Storing Settings
Storing Settings
The STORE key of the grandMA is very flexible.
If the STORE key is flashing, you can switch it off with a second press or use ESCAPE.
Example:
Example:
Example:
Example:
Example:
Select some fixtures and set the color wheel
– STORE + one of the buttons above or below an EXECUTOR fader (make sure you have toggled back from
CHANNEL to EXECUTOR): Stores the color setting as a cue on that Executor.
– STORE + one of the buttons of an EXECUTOR fader, where a cue was already stored, gives you the option to
overwrite, merge information or create a second cue.
1.10.7
1.10.7
1.10.7
1.10.7
1.10.7
CREATE LIST
– STORE + a cell in the GROUP window: Stores the chosen Fixtures as a new group (enter a name via keyboard)
– STORE + any cell in the preset COLOUR window: Stores the values as a color preset (enter name via keyboard)
– STORE + one of the VIEW keys on the right hand side of the displays: Stores the layout of the screen, the mouse
position, etc. as a view (enter a name ...)
With STORE + VIEW key you can store screens individually or all console wide.
In the ASSIGN menu, you can enter names sequences of cues.
1.1
1.1
1.1
1.1
1.10.5
0.5
0.5
0.5
0.5 Selecting and activating channels
Selecting and activating channels
Selecting and activating channels
Selecting and activating channels
Selecting and activating channels, fixtures and functions
, fixtures and functions
, fixtures and functions
, fixtures and functions
, fixtures and functions
Selecting and Activating have different meanings and are important terms and concepts when working with the
grandMA.
Selected fixtures or channels are what you are currently working with, you can tell what is selected by their
names in fixture / channel sheet being yellow. Active values determine which channels and parameters are to
be stored in the next cue and will be controlled by this cue later on. Values with a dark red backround will be
stored in the next cue, values with a bright red background are currently under your control and will also be
stored in the next cue. Channels not active when the cue is stored will not be affected by the playingback of this
cue. Selected fixtures or channels are automatically deselected if a setting was altered and new fixtures selected
(a single press of the CLEAR key will do the same).
Changing the selection:
– Any channel or function, being controlled in Direct Access mode, is automatically marked as selected.
– Pressing the CLEAR key several times, deletes the whole selection.
1
st
CLEAR: deselects – 2
nd
CLEAR: deactivates– 3
rd
CLEAR: deletes all values set by direct access and returns the
values to their defaults or to being controlled by playback.
TIPP
TIPP
TIPP
TIPP
TIPP
TIPP
TIPP
TIPP
TIPP
TIPP
