MA Lighting Technology GmbH . Dachdeckerstr. 16 . D-97297 Waldbüttelbrunn . www.malighting.de eMail: [email protected]
30
30
30
30
30
- Manufacturer: Manufacturer’s name from the Library.
- Comment: Enter a comment here.
- Date: If you see “Original“ here, this fixture is one from the MA Library. If a self-created fixture is used, you’ll find
the date off creation here.
- Type: Toggle between mirror or moving head Fixture. When using moving head Fixtures, the FIXTURE SHEET
will show a square left of the PAN value, indicating the current head position..
-
MIB Delay: To set a DELAY time for the MOVE IN BLACK function for this fixture. If Default is displayed, the set
value from the DEFAULT menu is used.
2.13
2.13
2.13
2.13
2.13
Settings in the DEFAULTS menu
- MIB Fade: To set a FADE time for the MOVE IN BLACK function for this fixture. If Default is displayed, the set value
from the DEFAULT menu is used.
2.13
2.13
2.13
2.13
2.13
Settings in the DEFAULTS menu
- BeamAngle: Max. Beamwidth in degree (Zoom and Iris-function corresponds to this value).
- Power: For the 3D view; see 3D instructions.
- Lumen: For the 3D view; see 3D instructions..
- Weight: For the 3D view; see 3D instructions.
If you select a fixture, the individual functions of this fixture will be displayed in the lower part of the
Displays.
- No: Listing of the individual DMX channels. If a number is displayed in red and with an asterisk, this channel has
been modified.
- Break: If one cell contains a “Yes“, you can assign a different DMX address from the next channel onwards. To
change the setting, select a cell and press the Encoder. Now, select „Yes“ and press the Encoder one more time.
- Attribut: Listing of the individual functions. Press Encoder and choose function.
- Type: „Coarse“ stands for a coarse channel, and „Fine“ for a fine channel.
- Snap: FADE/SNAP function for the respective channel.
2.3
2.3
2.3
2.3
2.3
DMX List -Single Channel-specific Adjustments for
the Current Show
- Inv: In this column, you can invert the respective channel.
- Default: This value is called up, if the Fixture or Channel is not controlled by CUE, Sequence, Preset or a direct
access. Can be changed with the left Encoder.n.
- Highlight: This value is called up, if these fixtures are selected and the HIGHLIGHT key is pressed. Can be
changed with the second Encoder.
- Stage: (No function assigned yet).
-
MIB Fade: Allows you to set a FADE time for the MOVE IN BLACK function for this Fixture. Can be changed with
the right Encoder..
- Profile: In this column, you can assign a profile to the channel.
2.8
2.8
2.8
2.8
2.8
Creating, assigning and deleting Profiles
- Time: For the 3D view; see 3D instructions.
-
React to Dimmer: depending to a virtual dimmer can be set
Functions of the individual bu
Functions of the individual bu
Functions of the individual bu
Functions of the individual bu
Functions of the individual buttons:
ttons:
ttons:
ttons:
ttons:
-
Add Line: To insert a new fixture or function above the selected line.
-
Delete Line: To delete the selected fixture or function.
-
Decimal Values: To display the table values as percentages. By pressing the button, you can switch between
decimal and hexadecimal representation.
