MA lighting grandMA, Руководство по эксплуатации

Страница: 104 / 232

MA Lighting Technology GmbH . Dachdeckerstr. 16 . D-97297 Waldbüttelbrunn . www.malighting.de eMail: info@malighting.de
104 104
104 104 104
5 . 1 . 3 5 . 1 . 3 5 . 1 . 3 5 . 1 . 3 5 . 1 . 3 Changing Button and Fader Functions Changing Button and Fader Functions Changing Button and Fader Functions Changing Button and Fader Functions Changing Button and Fader Functions
press
ASSIGN
press small executor window
press
FUNCTION
press SETTINGS
When touch on the FADER symbol key, a selection will appear where you can assign the respective function to
the Fader by another touch.
- Master: The Fader controls all programmed dimmer values of this Sequence.
- Swap: With the Fader, HTP channels in the sequence can be faded in and
all all all all all other HTP values not used in this
sequence are set to “0”
It is only possible to use the SWAP
or
Master fader.
-
FADE: With the Fader, the fade-in time between cues can be set manually, when using Chasers.
-
Speed: Chaser speed can be set with the Fader.
- Xfade: With the Fader, you can manually crossfade all parameters in to the next cue of the sequence.
-
XF A: If Split Crossfade is active, you can fade out the Cue that is currently playing back when pushing the fa-
der upwards or downwards.
If Split Crossfade is
not active not active not active not active not active
, you can fade out to the darkening Dimmer channels of the next Cue when
pushing the fader upwards or downwards.
-
XF B: If Split Crossfade is active, you can use the Fader to fade in the next Cue when pushing the fader upwards
or downwards.
If Split Crossfade is
not active not active
not active not active
not active , you can fade out to the next Cue and to the brightening Dimmer channels when
pushing the fader upwards or downwards.
-
Empty: Fader has no function.
-
Rate: Using the Fader, you can change all fade and delay times for sequences. If the fader is at 50%, all times
will be executed in the normal way. Using the RATE 1 button, you can automatically set the Fader back to
the 50% position.
-
MFade: This fader controls master in & outfade in a range from 0 to 10 seconds. It is used when starting or
switching off the running chase. With the encoder the „master fade“ can be set to “DEFAULT“. In this
position the predefined MFade from the menu setup/defaults/playback timing will be used.
-
Temp: Use the Fader to temporarily fade in the first Cue(step), then, the previous status will be restored, similar
to the „Temp“ key.
By a touch on the respective KEY symbol, a selection will appear in which any button can be allocated with diffe-
rent functions.
-
Go: The cue will be played back with all programmed FADE and DELAY times.
- Go–: For sequences, the previous cue is played back and all changes are executed (full tracking) using all
programmed FADE and DELAY times. For Chasers, the running direction will be reversed.
-
Pause: A running cue or a Chaser will be temporarily stopped. To continue use GO+ or GO–.
-
On: Reasserts the priority of the Executor making it the latest action thus overriding other executors which were