MA Lighting Technology GmbH . Dachdeckerstr. 16 . D-97297 Waldbüttelbrunn . www.malighting.de eMail: [email protected]
62
62
62
62
62
3.4.2
3.4.2
3.4.2
3.4.2
3.4.2PAUSE Function
PAUSE Function
PAUSE Function
PAUSE Function
PAUSE Function
With the Pause Function you can temporarily freeze (park) entire fixtures or just individual parameters of fixtures.
After the activation of the Pause Function, no further changes will be output by the console. But you can still
change and store fixtures or single functions internally. Output is shown in the STAGE -window, but not on the real
stage.
You can park single fixtures with all parameters. Parked fixtures are displayed by a blue bar on the side of the
name and all functions.
Press PAUSE key 1x (LED is on).
Click on fixture or fixture key in the Group Window or click on fixture in the Fixture Sheet.
You can also park single parameters of the fixtures. Parked parameters are displayed by a blue bar on the side of
the name and all functions.
Press PAUSE key 1x (LED is on).
Click on the functions in the Preset Control Bar (Switch on Preset Control Bar.
3.4.8
3.4.8
3.4.8
3.4.8
3.4.8
Options in the Fixture
Window) or directly on the parameters in the Fixture Sheet.
Parked fixtures, functions or parameters can be released again either individually or together.
Press GO+ key 1x (LED is on).
Click on fixture or fixture key in the Group window or click on fixture in the Fixture Sheet.
o r :
o r :
o r :
o r :
o r :
Click on the functions within the Preset Control Bar or directly on the parameters in the Fixture Sheet.
