Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99
. Operating Manual grandMA Version 5.4
21
21
21
21
21
Positioning fixtures:
You can only set the specific group selected in the Fixture Layer – it is not possible to select fixtures from the small
Stage window. To gain a better control, click on the small STAGE window (title bar turns dark blue) and change the
stage view using the Encoder right of the Display (turn or turn and press the Encoder).
in the
FIXTURE LAYER, select the fixture type
in the FIXTURES AND CHANNELS IN LAYER, select one or more fixtures
set the positions and targets of the fixtures using the 3 Encoders (shift linear on the x, y, and z axis, or
rotation around the x, y, and z axis) – check out results in the STAGE window. The values set will be displayed in
the back part of the table. Press and simultaneously turn the Encoder (right of the Display), to change the table
view. Turn it, until the columns for Position X, Y, Z and Rotation X°, Y°, Z° are displayed.
or
highlight a value directly
press on the right Encoder
enter the value using the Calculator
confirm with ENTER
Shift linear (S/Gs have no importance)
select one or more fixtures
select the Linear icon
select the space-axis icon
shift the fixtures along the space axes using the Encoder
Shift linear tilted (S/Gs have no importance)
Only for rotated fixtures; if the fixtures were not rotated before, this function is equal to the one described above
select one or more fixtures
select the Linear icon
select the Axis icon
shift the fixtures along the fixtures’ axes using the Encoder
