Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99
. Operating Manual grandMA Version 5.4
127
127
127
127
127
- select
MODULATOR PROPERTIES using the left Encoder below the Screen, chose an effect or a setting and
confirm by pressing on he Encoder on the side of the Screen.
NONE no effect selected
PWM Impulse Width Modulation
RANDOM Random fade-ins of individual channels of the selected function
TABLE here, specific effects have a special background (identical to TABLE in EDIT EFFECT)
FORM here, forms that were previously defined and are in the FORM pool memory have a special
background
-
MODULATOR SIZE: here, you can enter the size of the effect (in the graphics, 100% are entered)
- open the
Calculator using the Encoder below the Screen, enter the value und confirm with ENTER
-
MODULATOR SPEED: here, you can enter the effect speed in BeatsPerMinute
- open the
Calculator using the Encoder below the Screen, enter the value und confirm with ENTER
-
MODULATOR PHASE: here, you can enter the angle for shifting the modulator
- open the
Calculator using the Encoder below the Screen, enter the value und confirm with ENTER
All entries are executed immediately and can be controlled from the STAGE view or, even better, from the 3D
VISUALIZER.
- delete the settings by pressing 3x CLEAR; all effects will be deleted from the Programmer immediately.
or
Save setting as Cue:
press
STORE
press on an empty cell in the small Executor window or an empty Executor button
The effect will be saved as a Cue; in the Sheets, the white text on a violet background will change to yellow on a dark
background. If PROGRAMMER ONLY had been activated, all features will disappear from the Sheet. This Cue can now
be executed or edited like a normal sequence.
Applying EFFECTS to the Modulators:
By transferring effects to modulators, you are enabled to execute changes very rapidly. As the effect will be
permanent, you can delete a temporary change after its execution or save it as a Cue.
start the Effect button in the Effect pool
press
TOP
press the Effect button of the currently running effect in the Effect pool
The effect stops (disappears from the ALL RUNNING PROGRAMS menu) and its settings can now be seen in the
modulators. All fixtures involved are marked by a red bar; all settings taken from the effect, have a dark violet
background in the modulators (all changed modulators have a violet background).
