MA lighting grandMA Скачать руководство пользователя страница 180

Страница: 180 / 232

MA Lighting Technology GmbH . Dachdeckerstr. 16 . D-97297 Waldbüttelbrunn . www.malighting.de eMail: [email protected]

180

press FORMAT! to make sure that the show will be saved safely.

Saving a show:

- press

Save Show, confirm with OK or cancel the operation with Cancel.

- press

Save Show, enter a new name for the show, and confirm with ENTER.

insert an empty IBM/PC formatted 3.5

´´

-floppy disk, remove the write protection (small opening on the floppy

must be

closed

confirm with

OK.

The SHOW will be saved, after the window has been closed. The whole operation can take some minutes. You can
only save 1 show to a floppy.

if needed, use

YES to save the same show on a second floppy , or finish the operation with NO.

in the end, remove floppy from the drive.

111111.7 Loading a Show from Floppy disk

1.7 Loading a Show from Floppy disk

press

BACKUP

press

Floppy DISK

press LOAD Show.

insert the floppy containing the Show.

press

OK (operation can take some minutes). The Show is being loaded.

in the end, remove floppy from the drive, as otherwise the console will not boot on the next restart.

In order to avoid loading all users plus their respective profiles when loading a Show, you can choose one of the

following options:

- accept all user profiles = EVERYTHING

- do not accept any user profile = NOTHING

- accept only the user who had created the Show = DISK CREATOR.

This way, you can relieve the memory space and the processor. In case the users on the floppy are identical

with those already stored on the console, the request will be skipped.

Warning! You can only load shows that were created with versions 3.2 or later. If you have to convert shows created
with an earlier version, please contact the hotline (see below).

11.8 Loading a Demo Show

press

BACKUP

press Demo Show.

press LOAD Show.

select the desired show using the Encoder, and load it by pressing on the Encoder.

Содержание grandMA









































































































































































































































Результаты поиска

Содержание grandMA

Отзывы:

Похожие инструкции для grandMA

Бренды по названию

Популярные бренды

MA lighting grandMA, Руководство по эксплуатации

Результаты поиска

Содержание grandMA

Отзывы:

Похожие инструкции для grandMA

Бренды по названию

Популярные бренды