Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99
Hotline: +49 5251 688865-99
. Operating Manual grandMA Version 5.4
87
87
87
87
87
4 . 1 . 3
4 . 1 . 3
4 . 1 . 3
4 . 1 . 3
4 . 1 . 3 Overwriting a Cue
Overwriting a Cue
Overwriting a Cue
Overwriting a Cue
Overwriting a Cue
If you wish to overwrite a Cue completely, simply use the same EXECUTOR fader or EXECUTOR button once again.
The following window will appear:
In order to overwrite this cue completely, press the OVERWRITE key (If the executor contains more than one cue
you will have to be specific about which cue you want to Store - 4.2 Programming Sequences).
4.1.4
4.1.4
4.1.4
4.1.4
4.1.4 Merging a Cue
Merging a Cue
Merging a Cue
Merging a Cue
Merging a Cue
When merging cues, all existing and stored settings will be maintained. The newly set values will be stored and
added to the cue, while already existing values will be overwritten.
If you wish to merge a cue, simply use the same EXECUTOR Fader or EXECUTOR button once again. The SAVE
(STORE) window will appear (as above). In order to merge this cue, press the MERGE key (If the executor contains
more than one cue you will have to be specific about which cue you want to store - 4.2 Programming
Sequences).
4 . 1 . 5
4 . 1 . 5
4 . 1 . 5
4 . 1 . 5
4 . 1 . 5 Removing a Cue
Removing a Cue
Removing a Cue
Removing a Cue
Removing a Cue
In the removing operation, the active values (red) will be subtracted from the already existing cue.
If you wish to remove from a cue, simply use the same EXECUTOR Fader or EXECUTOR button once again. The
STORE window will appear (as above). In order to remove from this cue, press the REMOVE key (If the executor
contains more than one cue you will have to be specific about which cue you want to Store - 4.2 Programming
Sequences).
You can also remove specific parts of a complete sequence by entering: [STORE] [SEQUENCE] [Sequence number]
[CUE] [1] [THRU] [number of last Cue] [ENTER]. A window will open in which you confirm your operation by
pressing the REMOVE key. (This syntax also applies for “OVERWRITE” and “MERGE”.)
Caution!
Caution!
Caution!
Caution!
Caution!
In NON-TRACKING mode, only Dimmer channels of the first copied Cue are taken account of. For the
following Cues, the Dimmer values are “0” and will have to be reprogrammed manually.
4 . 2
4 . 2
4 . 2
4 . 2
4 . 2 Programming Sequences
Programming Sequences
Programming Sequences
Programming Sequences
Programming Sequences
Sequence is the generic term for multiple of cues, with the option of various Fade and Delay times per channel
and cue. Sequences can be stored either on an EXECUTOR fader or an EXECUTOR button.
Store the first Cue (first step of a sequence) either on an EXECUTOR fader or an EXECUTOR button.
4.1
4.1
4.1
4.1
4.1
Creating Cues
STORE ENCODER WINDOW:
press
STORE
The Encoder window displays the setting of 3 areas of the OPTION menu. The settings can be changed (for the
following STORE process) temporarily from the pull-up menus. On the next STORE, the very setting will reappear that
was defined in the Option menu.