LNS GT 326-E, Инструкция по эксплуатации, Страница: 65 / 218

7 - 12
Ch 7 GENERAL DESCRIPTION
GT 326-E
7.6 VISE (self-centering)
Vise (material clamping device) is used to hold the bar stock for insertion of the bar or extraction
of the remnant. Independently of bar diameter or bar profile, the clamping system is
self-centering. No adjustment is required. However for very small diameter or thin wall tubing the
clamping pressure can be optimized.
7.6.1 Layout of the elements
Designation Part no. Description
A XT121070000 Vise blades
B C12113000 Clamping device cylinder
C C11130400 Air regulator
7.6.2 Replacement of the blades
The clamping blades must be replaced when worn out. Proceed
as follows:
1. Unscrew the screws (A) and remove the worn blades (B).
2. Install the new blades and secure with screws.
B
A
A
C
z
z
z
z
z
z
z
z
z
z
z
z
A
z
z
z
z
z
z
z
z
z
z
z
z
B
Attention: Use caution when replacing the
blades. They are sharp and can cause harmful
cuts. Wearing protective gloves is recommended.