LNS GT 326-E, Инструкция по эксплуатации, Страница: 14 / 218

Chapter 3 SETTING INTO OPERATION
3 - 1
GT 326-E
3 SETTING INTO OPERATION
3.1 TRANSPORTATION
The bar feeder may be delivered either on a pallet or packed in a wooden crate according to the
custome
r’s requirements. To prevent injuries or damage to components, please follow the
recommended uncrating and lifting instructions.
3.1.1 Unpacking (wooden crate)
For practical and safety reasons, the bar feeder must be unpacked in a spacious, well-lit location.
1. If the bar feeder is received in a crate, start by unscrewing the top panel.
2. Remove the front.
3. Remove the side-walls.
A pusher and guiding channel set may be mounted in the bar feeder. Depending on the purchase
order, other sets may be delivered in a separate box. The electrical interface diagram is placed
inside the electrical cabinet. Documentation, tools, pusher collets, lathe connecting parts, front
tube/telescopic tube, and other accessories are packed separately.
1
2
3