Use
To
Manually Set Date and Time
[input date/time]
Enter the date and time.
Notes:
•
Manually setting the date and time sets Enable NTP to No.
•
The wizard lets you set the date and time in YYYY
‑
MM
‑
DD
‑
HH:MM
format.
Time Zone
[list of time zones]
Select the time zone.
Note:
GMT is the factory default setting.
Automatically observe DST
On
Off
Set the printer to use the applicable daylight saving time (DST) start and end
times associated with the printer Time Zone setting.
Note:
On is the factory default setting.
Enable NTP
On
Off
Enable Network Time Protocol, which synchronizes the clocks of devices on a
network.
Notes:
•
On is the factory default setting.
•
The setting is turned off if you manually set the date and time.
Understanding the printer menus
98
Содержание MS910 Series
