Uneven print density
Action
Yes
No
Step 1
a
Clean the charger and the printhead lens.
b
Resend the print job.
Is the print density uneven?
Go to step 2.
The problem is
solved.
Step 2
Replace the photoconductor unit, and then resend the print job.
Is the print density uneven?
Contact
The problem is
solved.
Vertical voids appear on prints
Leading edge
Trailing edge
Action
Yes
No
Step 1
a
Make sure your software program is using a correct fill pattern.
b
Resend the print job.
Do vertical voids appear on prints?
Go to step 2.
The problem is
solved.
Step 2
a
From the control panel, set the paper type and weight in the
Paper menu to match the paper loaded in the tray.
b
Resend the print job.
Do vertical voids appear on prints?
Go to step 3.
The problem is
solved.
Troubleshooting
233
Содержание MS910 Series
