Lexmark MS910 Series, Руководство пользователя

Страница: 79 / 260

Use To
Portrait Width
3.54–48 inches
89.9–1219 mm
Set the portrait width.
Notes:
•
If the width exceeds the maximum, then the printer uses the
maximum width allowed.
•
12 inches is the U.S. factory default setting. You can increase the
width in 0.01
‑
inch increments.
•
305 mm is the international factory default setting. You can
increase the width in 1
‑
mm increments.
Portrait Height
5.5–48 inches
139.7–1219 mm
Set the portrait height.
Notes:
•
If the height exceeds the maximum, then the printer uses the
maximum height allowed.
•
17 inches is the U.S. factory default setting. You can increase the
height in 0.01
‑
inch increments.
•
432 mm is the international factory default setting. You can
increase the height in 1
‑
mm increments.
Feed Direction
Short Edge
Long Edge
Specify the feed direction if the paper can be loaded in either
direction.
Notes:
•
Short Edge is the factory default setting.
•
Long Edge appears only when the longest edge is shorter than
the maximum width supported in the tray.
Bin Setup menu
Use To
Output Bin
Standard Bin
Bin [x]*
Specify the default bin.
Note: Standard Bin is the factory default setting.
Configure Bins
Mailbox
Link
Link Optional
Type Assignment
Specify configuration options for bins.
Notes:
•
Mailbox is the factory default setting. This treats
each bin as a separate mailbox.
•
Link configures all available bins as one large bin.
•
Link Optional links together all available bins
except the standard bin and only appears when
at least two optional bins are installed.
•
Type Assignment assigns each paper type to a
bin or linked bin set.
* [x] can be any number from 1 to 4 if the appropriate optional bins are installed. If multiple bins are assigned the
same name, then the name appears only once in the bin list.
Understanding the printer menus 79