Lexmark MS910 Series Скачать руководство пользователя страница 81

Страница: 81 / 260

Use

Network Setup Page

Print a report containing information about the network printer settings, such
as the TCP/IP address information.

Note:

This menu item appears only in network printers or in printers

connected to print servers.

Network [x] Setup Page

Print a report containing information about the network printer settings, such
as the TCP/IP address information.

Notes:

•

This menu item is available only when more than one network option
is installed.

•

This menu item appears only in network printers or in printers
connected to print servers.

Proﬁles List

Print a list of proﬁles stored in the printer.

Note:

This menu item appears only when LDSS is enabled.

Print Fonts

PCL Fonts

PostScript Fonts

Print a report of all the fonts available for the printer language currently set
in the printer.

Note:

A separate list is available for PCL and PostScript emulations.

Print Directory

Print a list of all the resources stored in an optional ﬂash memory card or
printer hard disk.

Notes:

•

Job Buffer Size must be set to 100%.

•

Make sure that the optional ﬂash memory or hard disk is installed
correctly and working properly.

•

This menu item appears only when an optional ﬂash drive or hard
disk is installed.

Asset Report

Print a report containing printer asset information, such as serial number
and model name.

Event Log Summary

Print a report containing a summary of all logged events.

Network/Ports menu

Active NIC menu

Use

Active NIC

Auto

[list of available network cards]

Allow the printer to connect to a network.

Notes:

•

Auto is the factory default setting.

•

This menu item appears only if an optional network adapter is installed.

Understanding the printer menus

Содержание MS910 Series





































































































































































































































































Результаты поиска

Содержание MS910 Series

Отзывы:

Бренды по названию

Популярные бренды

Lexmark MS910 Series, Руководство пользователя

Результаты поиска

Содержание MS910 Series

Отзывы:

Бренды по названию

Популярные бренды