Lexmark MS910 Series, Руководство пользователя

Страница: 160 / 260

Configuring supply notifications from the Embedded Web
Server
You can determine how you would like to be notified when supplies run nearly low, low, near end
‑
of
‑
life, or
reach their end
‑
of
‑
life by setting the selectable alerts.
Note: The percentage of estimated remaining supply that prompts the alert can be set on some supplies for
some supply conditions.
1
Open a Web browser, and then type the printer IP address.
2
Click Settings > Print Settings > Supply Notifications .
3
From the drop
‑
down menu, select one of the following notification options:
Notification Description
Off The normal printer behavior for all supplies occurs.
SNMP Only The printer generates a Simple Network Management Protocol (SNMP) alert when the
supply condition is reached. The status of the supply appears on the menus page and
status page.
E
‑
mail The printer generates an e
‑
mail when the supply condition is reached. The status of
the supply appears on the menus page and status page.
Warning The printer displays the warning message and generates an e
‑
mail about the status
of the supply. The printer does not stop when the supply condition is reached.
Continuable Stop
1
The printer stops processing jobs when the supply condition is reached, and the user
needs to press a button to continue printing.
Non Continuable Stop
1,2
The printer stops processing jobs when the supply condition is reached. The supply
must be replaced to continue printing.
1
The printer generates an e-mail about the status of the supply when supply notification is enabled.
2
The printer stops when some supplies become empty to prevent damage.
4
Click Submit .
Restoring factory default settings
If you want to keep a list of the current menu settings for reference, then print a menu settings page before
restoring the factory default settings. For more information, see
“Printing a menu settings page” on page 45 .
For a more comprehensive method of restoring the printer factory default settings, see “Erasing non
‑
volatile
memory” on page 128 .
Warning—Potential Damage: Restoring factory defaults returns most printer settings to the original factory
default settings. Exceptions include the display language, custom sizes and messages, and network/port
menu settings. All downloads stored in the RAM are deleted. Downloads stored in the flash memory or in a
printer hard disk are not affected.
1
From the home screen, navigate to:
> Settings > General Settings > Factory Defaults > Restore Now
2
Apply the changes.
Managing the printer 160