Lexmark MS910 Series, Руководство пользователя

Страница: 104 / 260

Use To
Timeouts
Sleep Mode
Disabled
1–120
Set the amount of time in minutes the printer waits after a job
is printed before it goes into a reduced power state.
Notes:
•
20 is the factory default setting.
•
Disabled appears only when Energy Conserve is set to
Off.
•
Lower settings conserve more energy, but may require
longer warm
‑
up times.
•
Select a high setting if the printer is in constant use.
Under most circumstances, this keeps the printer ready
to print with minimum warm
‑
up time.
Timeouts
Print with Display off
Allow printing with display off
Display on when printing
Allow the printer to print even when the display is off.
Note: Allow printing with display off is the factory default
setting.
Timeouts
Hibernate Timeout
Disabled
1 hour
2 hours
3 hours
6 hours
1 day
2 days
3 days
1 week
2 weeks
1 month
Set the amount of time before the printer enters Hibernate
mode.
Note: 3 days is the factory default setting.
Timeouts
Hibernate Timeout on Connection
Do Not Hibernate
Hibernate
Set the printer to Hibernate Timeout even when there is an
active Ethernet connection.
Note: Hibernate is the factory default setting.
Timeouts
Screen Timeout
15–300 sec
Set the amount of time in seconds the printer waits before
returning to Ready state.
Note: 30 sec is the factory default setting.
Timeouts
Prolong Screen Timeout
On
Off
Set the printer to continue a specified job without returning to
the home screen when the screen timeout timer expires.
Note:
Off is the factory default setting.
Understanding the printer menus 104