Lexmark MS910 Series Скачать руководство пользователя страница 158

Страница: 158 / 260

Moving the printer

CAUTION—POTENTIAL INJURY:

The printer weight is greater than 18 kg (40 lb) and requires two or

more trained personnel to lift it safely.

Before moving the printer

CAUTION—POTENTIAL INJURY:

Before moving the printer, follow these guidelines to avoid personal

injury or printer damage:

•

Turn off the printer, and then unplug the power cord from the electrical outlet.

•

Disconnect all cords and cables from the printer.

•

If the printer does not have a caster base but is conﬁgured with optional trays, then remove the trays.

•

Use the handholds located on both sides of the printer to lift it.

•

Make sure your ﬁngers are not under the printer when you set it down.

•

Make sure there is adequate clearance around the printer.

•

Use only the power cord provided with this product or the manufacturer’s authorized replacement.

Warning—Potential Damage:

Damage to the printer caused by improper moving is not covered by the

printer warranty.

Moving the printer to another location

The printer and its hardware options can be safely moved to another location by following these precautions:

•

Any cart used to move the printer must have a surface able to support the full footprint of the printer.

•

Any cart used to move the hardware options must have a surface able to support the dimensions of the
hardware options.

•

Keep the printer in an upright position.

•

Avoid severe jarring movements.

Shipping the printer

When shipping the printer, use the original packaging.

Maintaining the printer

158

Содержание MS910 Series





































































































































































































































































Результаты поиска

Содержание MS910 Series

Отзывы:

Бренды по названию

Популярные бренды

Lexmark MS910 Series, Руководство пользователя

Результаты поиска

Содержание MS910 Series

Отзывы:

Бренды по названию

Популярные бренды