Lexmark MS910 Series Скачать руководство пользователя страница 14

Страница: 14 / 260

Indicator light

Printer status

Off

The printer is off or in Hibernate mode.

Blinking green

The printer is warming up, processing data, or printing.

Solid green

The printer is on, but idle.

Blinking red

The printer requires user intervention.

Sleep button light

Printer status

Off

The printer is off, idle or in Ready state.

Solid amber

The printer is in Sleep mode.

Blinking amber

The printer is entering or waking from Hibernate mode.

Blinking amber for 0.1 second, then goes
completely off for 1.9 seconds in a slow,
pulsing pattern

The printer is in Hibernate mode.

Understanding the home screen

When the printer is turned on, the display shows a basic screen, referred to as the home screen. Use the home
screen buttons and icons to initiate an action.

Note:

Your home screen may vary depending on your home screen customization settings, administrative

setup, and active embedded solutions.

Touch

Change Language

Change the primary language of the printer.

Bookmarks

Create, organize, and save a set of bookmarks (URLs) into a tree view of folders and
ﬁle links.

Note:

The tree view does not include bookmarks created within Forms and

Favorites, and the ones in the tree are not usable in Forms and Favorites.

Held Jobs

Display all current held jobs.

Understanding the printer control panel

Содержание MS910 Series





































































































































































































































































Результаты поиска

Содержание MS910 Series

Отзывы:

Бренды по названию

Популярные бренды

Lexmark MS910 Series, Руководство пользователя

Результаты поиска

Содержание MS910 Series

Отзывы:

Бренды по названию

Популярные бренды