Use
To
Audio Feedback
Button Feedback
On
Off
Volume
1–10
Set the audio volume for the buttons.
Notes:
•
On is the factory default setting for Button Feedback.
•
5 is the factory default setting for Volume.
Show Bookmarks
Yes
No
Specify whether bookmarks are displayed from the Held Jobs
area.
Note:
Yes is the factory default setting.
Web Page Refresh Rate
30–300
Specify the number of seconds between Embedded Web
Server refreshes.
Note:
120 is the factory default setting.
Contact Name
Specify a contact name for the printer.
Note:
The contact name is stored on the Embedded Web
Server.
Location
Specify the location of the printer.
Note:
The location is stored on the Embedded Web Server.
Alarms
Alarm Control
Cartridge Alarm
Staple Alarm
Hole Punch Alarm
Set an alarm when the printer requires user intervention.
For each alarm type, select from the following options:
Off
Single
Continuous
Notes:
•
Off is the factory default setting for Cartridge Alarm,
Staple Alarm, and Hole Punch Alarm.
•
Single is the factory default setting for Alarm Control.
This sounds three quick beeps.
•
Continuous repeats three beeps every 10 seconds.
Timeouts
Standby Mode
Disabled
1–240
Specify the number of minutes of inactivity before the printer
enters a lower power state.
Note:
15 is the factory default setting.
Understanding the printer menus
103
Содержание MS910 Series
