Lenovo HX1310, Инструкция по установке и обслуживанию

Страница: 57 / 1002

Step 2. Lenovo ToolsCenter Suite CLI sets the DMI in the Integrated Management Module 2.1 (IMM2.1).
Select one of the following methods to access the Integrated Management Module 2.1 (IMM2.1)
to set the DMI:
• Online from the target system, such as LAN or keyboard console style (KCS) access
• Remote access to the target system (LAN based)
• Bootable medium containing Lenovo ToolsCenter Suite CLI (LAN or KCS, depending upon
the bootable media)
Step 3. Copy and unpack the Lenovo ToolsCenter Suite CLI package, which also includes other required
files, to the server. Make sure that you unpack the Lenovo ToolsCenter Suite CLI and the required
files to the same directory. In addition to the application executable (OneCLI or OneCLI64), the
following files are required:
• For Windows based operating systems:
– ibm_rndis_server_os.inf
– device.cat
• For Linux based operating systems:
– cdc_interface.sh
Step 4. After you install Lenovo ToolsCenter Suite CLI, type the following commands to set the DMI:
onecli config set SYSTEM_PROD_DATA.SysInfoProdName <m/t_model> [access_method]
onecli config set SYSTEM_PROD_DATA.SysInfoSerialNum <s/n> [access_method]
onecli config set SYSTEM_PROD_DATA.SysEncloseAssetTag <asset_tag> [access_method]
Where:
<m/t_model>
The server machine type and model number. Type
mtm xxxxyyy
, where xxxx is the machine
type (8693) and yyy is the server model number.
<s/n>
The serial number on the server. Type
sn zzzzzzz
, where zzzzzzz is the serial number.
<asset_method>
The server asset tag number. Type
asset aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
, where
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa is the asset tag number.
[access_method]
The access method that you select to use from the following methods:
• Online authenticated LAN access, type the command:
[­­imm
imm_user_id:imm_password@imm_internal_ip]
Where:
imm_internal_ip
The IMM2 internal LAN/USB IP address. The default value is 169.254.95.118.
imm_user_id
The IMM2 account (1 of 12 accounts). The default value is USERID.
imm_password
The IMM2 account password (1 of 12 accounts). The default value is PASSW0RD (with
a zero 0 not an O).
Note: If you do not specify any of these parameters, Lenovo ToolsCenter Suite CLI will use the
default values. When the default values are used and Lenovo ToolsCenter Suite CLI is unable to
Chapter 2
.
Configuring
43