Lenovo HX1310, Инструкция по установке и обслуживанию

Страница: 152 / 1002

• If you replace the original lithium battery with a heavy-metal battery or a battery with heavy-metal
components, be aware of the following environmental consideration. Batteries and accumulators that
contain heavy metals must not be disposed of with normal domestic waste. They will be taken back
free of charge by the manufacturer, distributor, or representative, to be recycled or disposed of in a
proper manner.
• To order replacement batteries, call 1-800-IBM-SERV within the United States, and 1-800-465-7999 or
1-800-465-6666 within Canada. Outside the U.S. and Canada, contact your Lenovo sales representative
or Lenovo reseller.
Note: After you replace the coin-cell battery, you must reconfigure the server and reset the system
date and time.
CAUTION:
When replacing the lithium battery, use only Part Number 33F8354 or an equivalent type battery
recommended by the manufacturer. If your system has a module containing a lithium battery,
replace it only with the same module type made by the same manufacturer. The battery contains
lithium and can explode if not properly used, handled, or disposed of.
Do not:
– Throw or immerse into water
– Heat to more than 100°C (212°F)
– Repair or disassemble
Dispose of the battery as required by local ordinances or regulations.
To remove the coin-cell battery, complete the following steps:
Step 1. Read the safety information that begins on “Safety” on page v and “Installation guidelines” on
page 100.
Step 2. Turn off the server and peripheral devices and disconnect the power cords and all external cables,
if necessary.
Step 3. Remove the cover (see “Removing the cover” on page 104).
Step 4. If necessary, lift PCI riser-card assembly 1 out of the chassis (see “Removing a PCI riser-card
assembly” on page 120).
138
HX1310, HX2310-E, HX3310, HX3310-F Installation and Service Guide