POWER CORE User Manual
Version: V6.0.0/5
50/459
7. Configuring POWER CORE
7.3
Opening an Existing Configuration
To open an existing project stored on your computer:
1.
Select
File
->
Open
from the top menu bar, or click on the
Toolbar icon, or use the keyboard
shortcut (
CTRL
+
O
).
2.
Select your project file and click on
Open
.
If you cannot see the file, check the
Files of type
option at the bottom of the dialog box; you may need to
change this to see the correct file type (
.db3
or
.mdb
).
The project opens, with the same workspace layout and docking options as at the last file save:
If the configuration was created using a different definition version, then you may be asked if you wish to convert
the project. Note that it may take a few seconds to open the project. During this time the status is shown in the
"progress" bar (below
Console
in the 'Project' window).
If you see an error stating that the project is already open then navigate to the project folder (using Windows
Explorer) and delete any
.txt
files. Then try opening the project again.
On POWER CORE and Nova17, a copy of the project file can be stored on the DSP Core. To download it to
your computer, use
.
