POWER CORE User Manual
Version: V6.0.0/5
312/459
18. Configuring Custom Logical Behaviour
18.11 Logic -> Gate
A
Gate
element is a logical GATE which can be used to swap two groups of signals (A to B). For example, to
switch the output of a monitoring section between Loudspeakers and Phones.
Each group of signals includes 8 inputs to 8 outputs.
General Parameters
GATE
Reference name for the element.
Reverse A/B
Assigns the input control signal which will action the A to B switch.
When the input control signal is a logical “0” then
In A.1
to
In A.8
are routed to
Out A.1
to
Out A.8
, and
In B.1
to
In B.8
are routed to
Out B.1
to
Out B.8
.
When the input control signal is a logical “1” then
In A.1
to
In A.8
are routed to
Out B.1
to
Out B.8
, and
In B.1
to
In B.8
are routed to
Out A.1
to
Out A.
8.
In A.1 to A.8
Assign the 8 group A input signals.
In A.1 to A.8
Assign the 8 group B input signals.
The control outputs appear under the “Logic -> <GroupName> -> Gate” branch of the 'Tree Selection' window:
Out A.1 to Out A.8
Group A outputs.
Out B.1 to Out B.8
Group B outputs.
