LAWO POWER CORE Скачать руководство пользователя страница 143

Страница: 143 / 459

POWER CORE User Manual

Version: V6.0.0/5

143/459

10. Audio Utilities

10.1

DMS Metering & Loopbacks

All systems provide

DMS

elements which can be assigned to a VisTool display for metering or to create audio

loopbacks to feed signals back into other parts of the system.

Mono DMS may be linked to operate in stereo or surround. Each DMS channel is equipped with silence detect
logic.

sapphire compact

and

Nova29

support 64 DMS;

sapphire MK2

and

POWER CORE

supports 256 DMS

presented in 4 groups of 64.

Additionally

Nova29

supports 256 internal loopbacks without silence detect and Vistool metering, presented in 4

groups of 64.

crystal

systems also support DMS and Loopbacks, but these operate slightly differently

and are accessed

from the “System -> Definition -> Parameter = DMS” branch of the ‘Tree Definition’.

To access the parameters:

Select a

DMS

entry from either the "

Audio Input

" or "

Audio Out Only

" branches of the 'Tree Definition'.

Then select the menu tabs to configure the

DMS Input

and

Loopback/Silence

parameters.

The same parameters can be accessed by double-clicking on

DMS

in "

Frames -> System Core

". DMS

parameters can also be edited in list form from the "Command -> Inputs" window.

10.1.1 DMS Input Parameters

Meter n

Reference name for the meter.

Type

On the 1st input of eight, you can select the following options from the drop down menu:

Mono

Stereo

– normal stereo L/R operation.

5.1

– this option links 1-6 of the set for L, R, C, LFE, Ls, Rs surround.

5.1+2

- this option links 1-8 of the set for 5.1 surround, as above, plus separate stereo

input.

On other odd numbered DMS, you have the option to check the Stereo box to link the
odd/even pair for stereo operation.

Matrix Enable

This option enables matrix control of the DMS, with options for ON, LS and OFF. See

Matrix

Enable

Label

Enter a label for the DMS.

Audio

Assigns the default audio signal.

Note that the audio feeding a DMS may also be configured in reverse - for example, the
DMS may be assigned as the audio input to another configuration element. In this case,
the default audio is overridden.

Color

Define the color for each DMS channel. The color is used for PPM bars in VisTool.

Содержание POWER CORE












































































































































































































































































































































































































































































Результаты поиска

Содержание POWER CORE

Отзывы:

Похожие инструкции для POWER CORE

Бренды по названию

Популярные бренды

LAWO POWER CORE, Руководство пользователя

Результаты поиска

Содержание POWER CORE

Отзывы:

Похожие инструкции для POWER CORE

Бренды по названию

Популярные бренды