LABORIE Nexam Pro CIM, Руководство пользователя

Страница: 242 / 278

242 Nexam Pro User Manual Appendix A
Plastics and rubbers can become brittle at lower temperatures and soft at
higher temperatures, this is not a problem if not used.
Electronic components are selected to cope with the specified conditions.
The system can withstand the transport conditions if it is clean, dry, and
protected by the manufacturer’s packaging.
Before placing into storage, the system must be clean, dry, and protected by a
dust cover. Before placing the system into operation, the system must be
allowed to acclimatize to the specified operating conditions for at least four
hours.
All repairs that are not performed by LABORIE personnel are the responsibility
of the hospital. LABORIE will not give any guarantee or take any responsibility
for any part that has been opened, adjusted, or replaced by hospital
personnel. The Nexam Pro measurement system may be opened for any
adjustment, replacement, maintenance, or repair by LABORIE qualified
personnel only.
General
WARNING No modification of this equipment is allowed.
WARNING Safety can be violated if the Nexam Pro measurement
system or one of its modules shows visible damage.
WARNING Do not attempt to open any LABORIE modules.
WARNING To avoid the risk of electric shock, this equipment must
only be connected to a supply mains with protective earth.
WARNING All devices must be powered via the Separating
Transformer to reduce risks involving dangerous
electrical currents.
WARNING Only connect items that have been specified as part of
the system or that have been specified as being
compatible with the Nexam Pro system into the
Separating Transformer. By plugging in unapproved
items, the level of safety may be reduced, and the IEC