LABORIE Nexam Pro CIM, Руководство пользователя

Страница: 195 / 278

Measurement Program Nexam Pro User Manual 195
In the investigation protocol you can specify automatic artefact detection .
The software will then automatically place artefact markers around an artefact.
When artefact is active, the
Artefact button will be down and the curves show
red borders.
Event marker
An event marker marks a point of interest during an investigation and has no
influence on parameter calculations. Event markers can be placed with the
Event button on the screen or with the Event key on the remote control. By
default, event markers are delayed markers
and the option ‘Enter comment at
event markers’ is default enabled. Choose
Settings > System settings to
enable ‘Place event markers immediately’ (see § 12.6).
Position markers (immediate markers)
During the investigation, the patient’s position (supine, sit or stand) can be
indicated by setting a position marker. Position markers can be placed by
clicking the buttons on the screen.
Audio comment marker (immediate marker)
When a sound card is present you can add spoken comment to the
investigation. This is done by adding an audio comment marker. After the
marker has been placed, a bar appears which indicates the recording time.
During this time, you can talk in the microphone. During analysis you can
replay the spoken comments.
Audio recording can be started by clicking the
Audio comment button on the
screen.
12.3.7 Pause Mode
During an investigation, you can activate the pause mode by clicking
the Pause button on the screen. This mode can be used when the patient is
repositioned. In the pause mode, the screen keeps scrolling. Data which has
passed the marker line is not recorded and is therefore excluded from the
calculations. The pause mode can be de-activated by clicking the Continue
button or the Pause button again.
NOTE The pause mode does not stop the pump or puller!