Kronoterm WPG 30, Руководство пользователя

Страница: 19 / 64

6.2018
19
4.3 Setting the temperature of DHW
Once the temperature of the DHW falls below the set temperature minus the parameter Hysteresis
(example: DHW setting is 50,0 °C, Hysteresis setting is 5,0 °C
 DHW heating will start at 44,9
°C), the controller switches the device from space heating to heating DHW. Heating DHW has
priority over other modes of operation.
Setting the temperature of DHW is performed in the following steps:
1.
Press key (MENU) in the basic menu.
2.
In the user menu choose the menu DHW with
the key and press the key (ENTER).
3.
In the menu DHW in the first line the parameter
DHW is chosen. To set the parameter press key
(ENTER).
4.
* * appear along the chosen parameter. The
keys and change the value of the
parameter DHW . This raises or lowers the
temperature of DHW.
To confirm the settings press key
(ENTER).
5.
Next to the set parameter you can again find the
symbols
> < .
For returning to the basic view press the key
(MENU) twice.
NOTE
The actual reached temperature of heated water in the DHW depends on the adequacy
of the DHW, pipelines, flow and ventilation of the system.
NOTE
For controlling the temperature settings of DHW in the tank you can set different modes
of operation (ECO, Comfort), daily and weekly schedules. See chapter 5.4.
Standby…………………
Heating..
35.5°C
Return 32.3°C
DHW 49.0°C
> DHW <
Additional source
Mode
Temperatures
> DHW 50.0°C <
Hysteresis 5.0°C
Schedule
Circulation Sched.
* DHW 50.0°C *
Hysteresis 5.0°C
Schedule
Circulation Sched.
> DHW 50.0°C <
Hysteresis 5.0°C
Schedule
Circulation Sched.