Kronoterm WPG 30, Руководство пользователя

Страница: 16 / 64

16
6.2018
NOTE
The space corrector influences the whole heating circuit and not the temperature of the
individual room. The desired room temperature where the spatial corrector is located
in the reference temperature for all other rooms of the heating circuit controlled by this
spatial corrector.
Before raising the temperature of heated water or the desired room temperature on the
spatial corrector make sure the valves on the heat sources in the room where it is too
cold for you, are completely or sufficiently opened. If the temperature of other rooms is
too high or too low open or close the valves for floor heating or radiators where the
deviations from the desired temperature take place.
NOTE
For maintaining the correct operation of the heating system you have to choose a
suitable operating mode - winter (heating and DHW) or summer (DHW and cooling -
only in certain models). For choosing the mode see chapter4.3.
NOTE
A detailed description of the settings and additional functions (weather report, DHW,
operating mode, information about the state of the device ...) see the manual for the
spatial corrector KT-2.
4.1.2 Setting room temperature with the spatial corrector KT-1
The spatial corrector KT-1 enables basic settings of room temperature.
By pressing the key or the LED display displays the
currently set desired room temperature. By pressing the
key
or again you adjust the desired room
temperature. By pressing the keys you adjust the values
by 0.5 °C. The change is confirmed automatically.
Quick setting:
By pressing and holding the key the
temperature setting changes in steps of 1 °C.
NOTE
The space corrector influences the whole heating circuit and not the temperature of the
individual room. The desired room temperature where the spatial corrector is located
in the reference temperature for all other rooms of the heating circuit controlled by this
spatial corrector. Before raising the temperature of heated water or the desired room
temperature on the spatial corrector make sure the valves on the heat sources in the
room where it is too cold for you, are completely or sufficiently opened.
If the temperature of other rooms is too high or too low open or close the valves for
floor heating or radiators in the rooms where the deviations from the desired
temperature take place.
NOTE
For maintaining the correct operation of the heating system you have to choose a
suitable operating mode - winter (heating and DHW) or summer (DHW and cooling -
only in certain models). For choosing the mode see chapter4.3.
NOTE
You can find a detailed description of settings and additional functions in the manual
for the spatial corrector KT-1.