Kronoterm WPG 30, Руководство пользователя

Страница: 40 / 64

40
6.2018
2. * * appear along the chosen parameter.
Choose the
parameter
Yes by pressing
and confirming by pressing the
(ENTER) key. You have thus turned on the
operation of the mode
Screed drying .
3. Other parameters of the programme for
Screed drying can be changed with the
same procedure.
For returning to the basic view press the
key (MENU) twice.
5.8 Meters for operating hours
If you want to see, the operating hours for individual components go to the main menu and press
the key
under consecutive no.1 in the table below. If you would like to examine other
parameters listed in the table below use the key to move to them.
Cons.
No. Parameters of operating hours view Parameter description
1. Operating hours for compressor in heating.
Operating hours for compressor in cooling.
Operating hours for compressor in heating
DHW.
D: Operating minutes of the current day.
D-1: Operating minutes of the previous day.
2. Operating hours of the heat source (ventilator,
submersible pump).
Operating hours of the auxiliary source 1 (flow
electric heater).
Operating hours of the auxiliary source 2
(external backup source).
Operating hours of the main circulation pump.
3. Operating hours of passive cooling.
Operating hours of backup source.
Number of daily power-on of the compressor in
heating.
Number of daily power-on of the compressor in
cooling.
4. Number of daily turn-on for compressor in
heating DHW.
Number of daily power-on of the compressor in
defrost.
Mode AUTO
*Screed drying
YES *
Initial 20.0°C
Maximum..………………30.0°C
Maximum…………………30.0°C
Step…………………………..24 h
Maintaining 264 h
>Final 20.0°C
<
Comp.HEAT.[h]: 0
Comp.COOL.[h]: 0
Comp.DHW [h]: 0
D: 0 D-1: 0
HeatSource [h]: 0
AdHeater 1[h]: 0
AdHeater 2[h]: 0
MainPump.[h]: 0
Passive [h]: 0
Alt.Sourc [h]: 0
Comp.Heata.[s/d]: 0
Comp.CooL. [s/d]: 0
Comp.DHW [s/d]: 0
Defrost [s/d]: 0