Kronoterm WPG 30, Руководство пользователя

Страница: 31 / 64

6.2018
31
5.1.3.1 Setting the temperature of heating water
By choosing the parameter Normal you set the temperature of heating water which is maintained
regardless the outside temperature.
NOTE
After start-up of the device there is usually no need to change the parameter Normal
in the menu Heating , except in cases of constructional changes in the heating system.
You perform the settings in the following steps:
1.
Press key (MENU) in the basic menu.
2.
The first line has the parameter Heating
selected. To set the parameter press key
(ENTER).
3.
Choose the parameter Normal by pressing
and press the (ENTER) key.
4.
* * appear along the chosen parameter. The
keys and change the value of the
parameter Normal . This way you raise or lower
the maximum temperature of heating water at
outside temperature of -18 °C. To confirm the
settings press key
(ENTER).
The recommended values of the maximum
temperature for individual types of heating are
given in chapter 5.1.
5.
After confirming the settings the device will heat
the water to the set temperature regardless of
the outside air temperature. For returning to the
basic view press the key
(MENU) twice.
NOTE
For economical use of heating we recommend the use of
heating curve
heating .
For heating curve you can choose various temperature modes of operation with
setting daily and weekly schedules. See chapter 5.4.
Standby…………………
Heating 35.5°C
Return 32.3°C
DHW 49.0°C
Heating
> 1. Circuit <
2. Circuit
3. Circuit
C/W I
Schedule
>Normal
35.5°C <
Eco -2.0°C
C/W I
Schedule
*Normal 45.0°C *
Eco -2.0°C
C/W I
Schedule
>Normal 45°C <
Eco -2.0°C