Kronoterm WPG 30, Руководство пользователя

Страница: 61 / 64

6.2018
61
11 Settings of your heating system at start-up
In case you need help from the installer who performed the installation or an authorised service,
record in the tables below:
Your designations of rooms you control with the parameters of the control interface
TERMOTRONIC.
The values of the parameters Normal and Correction which you have set for your heating
system.
The setting for the parameter (371) Buff.tank
The parameter in the heating mode
Type of
circuit
(circle it)
The set
heating
mode
(circle it) Conception of the
circuits of the
control interface
TERMOTRONIC Recommended set
temperature
Your
designations
of rooms
Normal Correction Hysteresis
Weather
control/
maintaining
constant
temperature
Heating
direct 1. Circuit
direct/mixing 2. Circuit
direct/mixing 3. Circuit
direct/mixing 4. Circuit
The parameter in the cooling mode:
Type of
circuit
(circle it)
Conception of the
circuits of the control
interface
TERMOTRONIC Recommended set
temperature
Your designations of
rooms
Normal Hysteresis
Cooling
direct 1. Circuit
direct/mixing 2. Circuit
direct/mixing 3. Circuit
direct/mixing 4. Circuit
Parameters for DHW:
Conception of the parameters of
the control interface
TERMOTRONIC Recommended set
temperature Your designations of rooms
Normal Standby
DHW
Filled out by the authorised contractor for commissions:
Setting the parameter (371) Buff.tank at start-up (circle it)
Buff.const Buff.if needed
Designation of hydraulic wiring diagram (Catalogue of hydraulic wiring diagrams of the device
manufacturer) according to which the wiring of the DHW room is implemented