Kronoterm WPG 30, Руководство пользователя

Страница: 23 / 64

6.2018
23
1.
Press key (MENU) in the basic menu.
2.
In the user menu choose the menu Additional
source
with the key and press the key
(ENTER).
3.
In the first line choose the parameter Switch o
and press the key (ENTER).
4.
* * appear along the chosen parameter. The
keys and change the value of the
parameter Switch o constant . The auxiliary
source will operate together with the heat pump.
To confirm the settings press key ENTER.
5.
For returning to the basic view press the key
(MENU) twice.
6.
In the first row, after switching on the Backup
source, the main display will display the
information about the status of the device
AdHeater .
NOTE
From an economic standpoint we advise using the additional source only if necessary
because using it means higher heating costs. This is why we recommend to switch the
auxiliary heat source from
constant back to Need when there is no more need for
additional heating capacity.
4.7 Manual activation of the additional heat source
In case the device has a malfunction or heating with the device is not possible for whatever reason,
we recommend activating the additional source- the flow electrical water heater which will take over
the heating of the heating and DHW.
Activating the backup source manually is performed in the following steps:
1.
Press key (MENU) in the basic menu.
Standby…………………
Heating
35.5°C
Return 32.3°C
DHW 49.0°C
> Additional source <
Mode
Temperatures
>Switch o Need<
Bi-point -5.0°C
Delay
30 min
Mode PARALLEL
*Switch o constant*
Bi-point -5.0°C
Delay
30 min
Mode PARALLEL
> Switch o constant <
Bi-point -5.0°C
Delay
30 min
Mode PARALLEL
Heating + add. source
Heating ► 40°C
Return 32.3°C
DHW 49.0°C
Standby…………………
Heating
35.5°C
Return 32.3°C
DHW 49.0°C