26
Instandhaltung
Maintenance
Wartung und
Sicherheitsüberprüfung
Wartung
Eine vorbeugende Wartung ist nicht zwingend
erforderlich. Regelmäßige Wartungen können aber
dazu beitragen, eventuelle Störungen frühzeitig zu
erkennen und so die Sicherheit und Lebensdauer
des Gerätes erhöhen. Wartungsdienste können
bei Ihrer zuständigen Gebietsvertretung oder beim
Hersteller erfragt werden.
Sicherheitsüberprüfung/ Wieder-
holungsprüfung nach IEC
|
62353
3
WARNUNG:
Unabhängig von den in den
verschiedenen Ländern vorgeschriebenen
Unfallverhütungsvorschriften
oder Prüfungsintervallen für
Medizingeräte müssen an diesem
Gerät Sicherheitsüberprüfungen/
Wiederholungsprüfungen im Sinne der
IEC
|
62353 einmal jährlich von einer elektro-
technischen Fachkraft durchgeführt und
protokolliert werden.
Sichtprüfung
1. Gerät und Zubehör auf
funktionsbeeinträchtigende mechanische
Schäden kontrollieren.
2. Sicherheitsrelevante Aufschriften auf Lesbarkeit
kontrollieren.
Elektrische Messungen
•
Kontrolle der Geräteschutzsicherungen
•
Schutzleiterwiderstand gemäß IEC
|
62353
messen: Grenzwerte entnehmen Sie bitte der
aktuellen Norm.
•
Erdableitstrom gemäß IEC
|
62353 messen:
Grenzwerte entnehmen Sie bitte der aktuellen
Norm.
•
Berührungsstrom gemäß IEC
|
62353 messen:
Grenzwerte entnehmen Sie bitte der aktuellen
Norm.
•
Patientenableitstrom gemäß IEC
|
62353 messen:
Grenzwerte entnehmen Sie bitte der aktuellen
Norm.
Maintenance and
safety check
Maintenance
Preventive maintenance is not essential. Regular
maintenance can, however, contribute to identify-
ing potential problems before they become serious,
thus enhancing the instrument’s reliability and ex-
tending its useful service life. Maintenance services
can be obtained from your local representative or
from the manufacturer.
Safety checks/repeat inspections
as per IEC
|
62353
3
WARNING:
Regardless of the accident
prevention regulations or testing intervals
for medical devices prescribed in different
countries, with this device safety checks/
repeat inspections as de
Ƃ
ned by IEC
|
62353
must be performed and recorded by a
quali
Ƃ
ed electrician at least once a year.
Visual inspection
1. Check the device and accessories for any me-
chanical damage which may impair functionality.
2. Check that inscriptions relevant to safety are
legible.
Electric measurements
•
Inspect the device safety fuses
•
Measure protective ground resistance in accor-
dance with IEC 62353: The limit values can be
found in the current standard.
•
Measure earth leakage current in accordance
with IEC 62353: The limit values can be found
in the current standard.
•
Touch current measured according to
IEC
|
62353: The limit values can be found in the
current standard.
•
Patient leakage current measured according to
IEC
|
62353: The limit values can be found in the
current standard.
Onderhoud
Onderhoud en
veiligheidscontrole
Onderhoud
Preventief onderhoud is niet per se noodzakelijk.
Regelmatig onderhoud kan echter bijdragen
aan vroegtijdige herkenning van storingen en zo
de veiligheid en levensduur van het instrument
verhogen. Onderhoudsdiensten kunnen bij uw
plaatselijke regiovertegenwoordiging of de fabrikant
worden opgevraagd.
Veiligheidscontrole/herhalingscontroles
conform IEC
|
62353
3
WAARSCHUWING:
ongeacht de in
verschillende landen geldende voorschriften
voor ongevallenpreventie of de controle-
intervallen voor medische apparaten
moeten in het kader van IEC
|
62353 aan
dit apparaat eenmaal per jaar door een
bevoegde elektricien veiligheidscontroles/
herhalingscontroles worden uitgevoerd en
gedocumenteerd.
Visuele controle
1. Apparaat en accessoires op functiebeperkende,
mechanische schade controleren.
2. Veiligheidsrelevante opschriften controleren op
leesbaarheid.
Elektrische metingen
•
Controle van de veiligheidszekeringen van het
apparaat
•
Aardingsweerstand conform IEC
|
62353 meten;
de grenswaarden vindt u in de actuele norm.
•
Aardlekstroom conform IEC
|
62353 meten;
de grenswaarden vindt u in de actuele norm.
•
Contactstroom conform IEC
|
62353 meten;
de grenswaarden vindt u in de actuele norm.
•
Patiëntlekstroom conform IEC
|
62353 meten;
de grenswaarden vindt u in de actuele norm.
Содержание 20161420-1
Страница 2: ......
Страница 4: ...IV Geräteabbildungen Photographs of the equipment U Q I O P q RT Y W E w r e t Apparaatafbeeldingen ...
Страница 55: ......