KAESER KOMPRESSOREN SIGMA CONTROL 2, Руководство по обслуживанию

Страница: 16 / 190

Function Menu
no.
Action steps Chapter
Activate the
«Remote
control» key
5.5
8
<Configuration – External DI / AII signal – Key remote – ☑>
8.2.13
Activate
«Remote
control»
– Activate «Remote control» key – Press the «Remote control»
key
8.2.13
Display operat‐
ing data
Change operat‐
ing hours
3 <Operating data – Operating hours – Motor / Block> 9.6
Set mainte‐
nance interval
4
<Maintenance – Set component maintenance interval>
9.7
Display messag‐
es
1.1.1 Press the «Information» key 9.4
Acknowledge
messages
– Press the «Acknowledge» key 9.3
Fault messages 1.1.1 A fault message shuts the machine down. The
Fault LED flash‐
es red. Fault messages are identified by the letter A. Example:
<0002 S k 31.12.15 13:14:15 Overload blower motor>
10.2
Warning mes‐
sages
1.1.1 If maintenance work needs to be carried out or if the warning is
displayed before a fault, the yellow
Warning LED flashes.
Warning messages are identified by the letter W.
10.3
Diagnostic mes‐
sages
1.1.1 A diagnostic message shuts the machine down. Diagnostic
messages provide information regarding the status of the con‐
troller and the connected input/output modules. They also as‐
sist authorised service partners with troubleshooting. Diagnos‐
tic messages are identified by the letter D.
10.5
System messag‐
es
1.1.1 A system message shuts the machine down. System messag‐
es are identified by the letter Y.
10.6
Tab. 4 Functions overview
Settings can be entered following log-in with an RFID Equipment Card providing access level
2.
1 SIGMA CONTROL 2 Quick reference guide
1.4 Functions overview
4
Service Manual Controller
SIGMA CONTROL 2 BLOWER ≥ 4.0.X
No.: 901700 14 E