KAESER KOMPRESSOREN SIGMA CONTROL 2, Руководство по обслуживанию

Страница: 78 / 190

Precondition Access level 2 is activated.
1. Open the 8.1.3
<Communication – Ethernet/SIGMA NETWORK – E-mail> menu.
2. Use «Up» or «Down» to select the
Repeat cut-off time: line.
3. Press «Enter».
The set value for
Repeat cut-off time: in minutes flashes.
4 0 0 m b a r 0 8 : 1 5 A M 8 0 ° C
Header
8.1.3 E-mail
Menu
active: ☐
Activating/deactivating the e-mail function
Blower number: 1
Language: English GB
Setting the language
Repeat cut-off time: 5min
Use SSL: ☑
Encryption option
------------------------------
4. Use «Up» or «Down» to set the value for
Repeat cut-off time:.
5. Press «Enter».
The setting is applied.
6. Press «Escape» repeatedly to leave this menu.
Result Repeat cut-off time: is set.
8.2.16 Setting the time server
If SIGMA CONTROL 2 is connected to the network, you can set the access to an SNTP server
available in the Internet or a local Intranet. SIGMA CONTROL 2 then automatically imports the
date and time settings and ensures continuous synchronisation of the internal clock with the exter‐
nal time server.
Precondition Access level 2 is activated.
IP configuration is set; see chapter 8.2.14.
The time server's IP address is known. Request the required information from your IT department.
1. Open the 5.1.2
<Configuration – General – Time server> menu.
2. Use «Up» or «Down» to select the
IP address line.
4 0 0 m b a r 0 8 : 1 5 A M 8 0 ° C
Header
5.1.2 Time server
Menu
active: ☐
Activating/deactivating the time server function
IP address 192.053.103.103
Example address, time server
3. Press «Enter».
The first group of numbers of the
IP address flashes 192.053.103.103.
4. Use «Up» or «Down» to set the first group of numbers of the
IP address.
8 Initial Start-up
8.2 Setting the controller
66
Service Manual Controller
SIGMA CONTROL 2 BLOWER ≥ 4.0.X
No.: 901700 14 E