KAESER KOMPRESSOREN SIGMA CONTROL 2, Руководство по обслуживанию

Страница: 72 / 190

3. Press the «Enter» key.
The display for the selected unit flashes.
4. Use the «Up» or «Down» key to set the unit.
5. Press the «Enter» key.
The setting is applied accordingly.
6. Press the «Escape» key repeatedly to exit the menu.
Setting the units for the temperature display
Set the units for the temperature display:
Format Example
°C 46°C
K 319K
°F 114°F
Tab. 55 Settings options for the temperature units
Precondition Access level 2 is activated
1. Open the menu 5.1 <Configuration – General>.
2. Using the «Up» or «Down» key, select the line
Temperature unit.
4 0 0 m b a r 0 8 : 1 5 A M 8 0 ° C
Header
5.1 General
Menu
Time format hh:mm:ssAM/PM
······························
Pressure unit bar
Unit of pressure
Temperature unit °C
Unit of temperature
······························
Display illumination
3. Press the «Enter» key.
The display for the selected unit flashes.
4. Use the «Up» or «Down» key to set the unit.
5. Press the «Enter» key.
The setting is applied accordingly.
6. Press the «Escape» key repeatedly to exit the menu.
8.2.11 Setting the display illumination
Set the display illumination mode:
Mode 1 2 3
Indicator
Automatic On Off
Function Illumination is extin‐
guished after the
timeout has elapsed
Permanent setting
Illumination "on"
Permanent setting
Illumination "off"
Tab. 56 Display illumination
8 Initial Start-up
8.2 Setting the controller
60
Service Manual Controller
SIGMA CONTROL 2 BLOWER ≥ 4.0.X
No.: 901700 14 E