KAESER KOMPRESSOREN SIGMA CONTROL 2, Руководство по обслуживанию

Страница: 130 / 190

8.7.4.1 Establishing the electrical connection
You need the following accessories to create the network connection with SIGMA NETWORK or
Ethernet:
■ SIGMA NETWORK cable (7.9679.0) or Ethernet cable with a maximum connection length of
100 m each
■ For each machine with SIGMA CONTROL 2:
─ Retrofit kit LAN RJ45 (7.5250.01870)
■ For connecting the machines to a network (LAN) or switch:
─ 2x RJ45 plug (7.7628.1)
➤ Create the electrical connection according to the local condition. For more information, see the
installation manual for the retrofit kit LAN RJ45 (7.5250.01870)
Install the Ethernet cable
Use a cross-linked Ethernet cable for the direct connection of two machines.
Fig. 31 Direct connection of two SIGMA CONTROL 2
1
Controller machine 1 (Master mode)
2
Ethernet interface X1
3
Ethernet cable, cross-linked
4
Controller machine 2 (Slave mode)
5
Ethernet interface X1
➤ Install the Ethernet cable between the two machines.
When you connect the machines to a network (LAN) or switch (when using KAESER CONNECT
for example).
➤ Install the Ethernet cable from each machine to the LAN connection or switch.
Connect the Ethernet cable with the machine
For each machine:
8 Initial Start-up
8.7 Setting the machine for master control operation
118
Service Manual Controller
SIGMA CONTROL 2 BLOWER ≥ 4.0.X
No.: 901700 14 E