KAESER KOMPRESSOREN SIGMA CONTROL 2, Руководство по обслуживанию

Страница: 165 / 190

9.9.6 Displays at the EtherNet/IP-Module
The communication module features LEDs providing information about the module status.
Fig. 41 EtherNet/IP communication module – LEDs and interface
1
Communications module
2
LED NS: Network status
3
LED MS: Module status
4
EtherNet/IP Port 1
5
EtherNet/IP Port 2
6
LED connection status Port 1
7
LED connection status Port 2
LED Colour State Meaning
2
NS off Module without voltage or IP address not available
Green illuminates continuously Module in operation, connection has been made
flashes Module waits for connection
Red illuminates continuously Duplicate IP address or internal fault
flashes
Monitoring time exceeded (time-out)
3
MS off Module without voltage
Green illuminates continuously Module in operation, master communicates (scanner in
run status)
flashes Module not configured or master in idle (scanner in idle
status)
Red illuminates continuously Internal fault, module in "EXCEPTION" status
flashes
The currently used settings do not correspond to the
saved settings
6
,
7
off No connection.
Green illuminates continuously Connection established, 100 Mbit/s
flashes Communication running, 100 Mbit/s
Yellow illuminates continuously Connection established, 10 Mbit/s
flashes Communication running, 10 Mbit/s
Tab. 95 EtherNet/IP communication module – Interpretation of LEDs
9.10 Save data
SIGMA CONTROL 2 settings can be backed up to an SD card.
9 Operation
9.10 Save data
No.: 901700 14 E
Service Manual Controller
SIGMA CONTROL 2 BLOWER ≥ 4.0.X
153