IPG IX-6168-PS, Справочник по аппаратуре

Страница: 103 / 136

10-1
Workstation Ventilation
10
Ventilation and Debris Control
IPG Photonics workstations use several kinds of ventilation to keep the work
environment safe and control contamination. The included IX-6168-PS Facility
Requirements (IPG part number P21-010255) includes the specifications for connecting
the workstation to your facility’s ventilation system.
Workstation Ventilation
Roof Exhaust
IPG Photonics enclosed workstations have an enclosure ventilation fitting on the top
for a 4-inch duct. This duct connects to your facility’s ventilation system, creating
slight negative pressure inside the whole enclosure. This removes excess heat and
keeps vapors and particulates from escaping into the surrounding area.
The workstation requires ventilation for the laser enclosure, the workstation
enclosure, and the processing area.
WARNING! The gases ventilated from the system may be toxic. Be sure to expel the gases
completely outside the facility and in accordance with local, regional and national
standards.
Figure 84: Workstation Ventilation Connections—located on top of the enclosure
Workstation Enclosure Ventilation Specifications:
❑
10-cm (4-inch) round duct fitting
❑
300–600 l/min (10–20 scfm)
Processing Area Ventilation Specifications:
❑
1.25-inch male NPT fitting
❑
300–1200 l/min (10–40 scfm), depending upon application, at 0.3 atmosphere (10
in. Hg)
Ventilation for Workstation Enclosure:
4-inch (10-cm) Round Duct
Suction for Processing Area:
1.25-inch Male NPT to the
house system
The IX-6168-PS may also use
an external vacuum pump