IPG IX-6168-PS, Справочник по аппаратуре

Страница: 73 / 136

7-7
Motion Control and Digital I/O Electronics
Motion Control
The system controls stage motion through an interface card in the workstation’s
computer. Signals from the interface card control a motion-control amplifier, which in
turn controls the motor in a motion stage. Each motor controls one axis of motion. A
stage can have one axis of motion (as with the spindle stage) or two axes of motion (as
with the X-Y stage).
Figure 64: Motion Control Overview
Computer Interface Cards
The system’s computer may have one or two Galil interface cards, depending on how
many axes of motion must be controlled in the system. The card comes in four models
for controlling 2, 4, 6, or 8 axes each.
Galil PC Inter-
face Card
Motion-Control Amplifier
Axis
Controlled Circuit
Breaker
Position Type
DMC-1886
1/A DC Brushless Servo Motor X CB6 - 2A
1/B DC Brushless Servo Motor Y CB7 - 2A
1/C DC Brushless Servo Motor Theta CB8 - 2A
1/D DC Brushless Servo Motor Z CB9 - 2A
2/E DC Brushless Servo Motor Zoom CB10 - 1A
1 2 3 4
Computer
Motor
Motor
Motor
Motor
Interface
card
Bank of
motion-control
amplifiers