IPG IX-6168-PS страница 27 Скачать руководство пользователя

Страница: 27 / 136

2-1

About This Manual

System Overview

This chapter provides an overview of the IX-6168-PS Laser Micromachining System.

About This Manual

The IX-6168-PS Hardware Reference Guide is intended to provide all of the necessary

information required to safely operate and maintain the IX-6168-PS Laser

Workstation. It is not intended to be a service manual for repair technicians. Please

contact IPG Photonics Customer Service for information on replacement parts and

repairs. Also refer to the

IX-6168-PS Workstation Facility Requirements

(IPG Photonics

part number P21-010255) for installation details and electrical specifications for this

system.

Use of Hyperlinks in Adobe

Acrobat

There are numerous hyperlinked shortcuts in place throughout this manual that can

be taken advantage of when viewing the manual as a PDF file in Adobe Acrobat.

Every reference to a figure title, chapter, heading, sub-heading, etc. has been authored

using cross-referenced hypertext that contains a link to the section of the manual

being referenced. Clicking on this hypertext will instantly switch the manual’s page to

the referred section.

1. Locate the cross-referenced hypertext by noting any sentence or call-out that

contains a reference to a chapter name, section heading, figure title, etc.

2. Roll the mouse over the text and observe if the cursor changes to a finger-pointing

hand. If it does, then the text contains a hyperlink.

3. Click on the hypertext with the finger-pointing hand cursor. The manual will

instantly advance to the referred section.

4. Press and hold “Alt” and “left arrow” to return to the original source location.

System Description

The IX-6168-PS Workstation is a Class 1 laser processing workstation that uses an

internally

mounted

diode-pumped solid-state (DPSS)

laser with external power supply. It

also features an optional Integrated Automation Platform (IAP 2.0) wafer robot and

Galvo Scanning Optical Head.
The IX-6168-PS Workstation is a programmable system for processing parts using UV

laser light. The system controls the shape, size, and power of the laser beam, and

moves the part under the beam for processing.

Содержание IX-6168-PS









































































































































Результаты поиска

Содержание IX-6168-PS

Отзывы:

Похожие инструкции для IX-6168-PS

Бренды по названию

Популярные бренды

IPG IX-6168-PS, Справочник по аппаратуре

Результаты поиска

Содержание IX-6168-PS

Отзывы:

Похожие инструкции для IX-6168-PS

Бренды по названию

Популярные бренды