INVT Goodrive GD300-19-004G-4, Руководство по эксплуатации

Страница: 52 / 255

Goodrive300-19 series open loop vector inverter special for hosit Function parameters
-51-
Function
code
Name Detailed instruction of parameters
Default
value
Modify
smoothly after tracking the rotation speed and
direction automatically. It is suitable in the cases
where reverse rotation may occur to the big inertia
load during starting.
Note:
≥4kW, the function is available.
P01.01
Starting
frequency of
direct start
Starting frequency of direct start-up means the
original frequency during the inverter starting. See
P01.02 for detailed information.
Setting range: 0.00~50.00Hz
0.50Hz
◎
P01.02
Retention
time of
starting
frequency
Set a proper starting frequency to increase the torque
of the inverter during starting. During the retention
time of starting frequency, the output frequency of the
inverter is the starting frequency. And then, the
inverter will run from the starting frequency to the set
frequency. If the set frequency is lower than the
starting frequency, the inverter will stop running and
keep in the stand-by state. The starting frequency is
not limited in the lower limit frequency.
Setting range: 0.00~50.00s
0.00s
◎
P01.03
The braking
current
before
starting
The inverter will carry out DC braking at the braking
current set before starting and it will speed up after
the DC braking time. If the DC braking time is set to 0,
the DC braking is invalid.
The stronger the braking current, the bigger the
braking power. The DC braking current before starting
0.0%
◎
P01.04
The braking
time before
0.00s
◎