INVT Goodrive GD300-19-004G-4, Руководство по эксплуатации

Страница: 163 / 255

Goodrive300-19 series open loop vector inverter special for hosit Basic operation instruction
-162-
Set
value
Function Instruction
given frequency channel.
13
Shifting between A frequency
and B frequency
This function can realize the shifting between the
frequency setting channels.
The 13
th
function can realize the shifting between A
frequency reference channel and B frequency
reference channel.
The 14
th
function can realize the shifting between A
frequency given channel and the combination setting
channel set by P00.09
The 15
th
function can realize the shifting between B
frequency given channel and the combination setting
channel set by P00.09
14
Shifting between the
combination setting and A
frequency
15
Shifting between the
combination setting and B
frequency
16 Multi-step speed terminal 1 The 16 stage speeds can be set by the combination of
digital state of four terminals.
Note: Multi-step speed 1 is the low bit, multi-step
speed 4 is the high bit.
Multi-step
speed 4
Multi-step
speed 3
Multi-step
speed 2
Multi-step
speed 1
BIT3 BIT2 BIT1 BIT0
17 Multi-step speed terminal 2
18 Multi-step speed terminal 3
19 Multi-step speed terminal 4
20 Multi-step speed pause
Shield the multi-step speed selection terminal function
to keep the setting value at the current state.
21 ACC/DEC time selection 1 Select 4 ACC/DEC time by the combination of the 2
terminals.
Terminal
1
Terminal
2
ACC/DEC time
selection
Corresponding
parameter
OFF OFF ACC/DEC time 1 P00.11/P00.12
ON OFF ACC/DEC time 2 P08.00/P08.01
OFF ON ACC/DEC time 3 P08.02/P08.03
ON ON ACC/DEC time 4 P08.04/P08.05
22 ACC/DEC time selection 2
23~28 Reserved
29 Torque control disabling
The inverter shifts from torque control mode to speed
control mode.
30 ACC/DEC disabling Ensure the inverter will not be affected by the external